If you want to boot Home windows seven into Safe and sound Method, it usually means that there is in all probability some thing incorrect with your laptop. Safe and sound Method can assist you diagnose and at times even restore difficulties. Even so, ahead of executing so, you have to to start with know how to boot your Home windows seven laptop into Safe and sound Method. In this write-up, we explore what Safe and sound Method is and how it is effective, and we stroll you via the strategies of having in and out of it, in Home windows seven:

one. Keep down the F8 critical throughout the Home windows seven boot

The swiftest approach for coming into Home windows 7’s Safe and sound Method when you are not able to boot ordinarily, is to keep down the F8 critical on your keyboard though your Computer is setting up, instantly following turning it on. Some more mature programs might prevent loading the working technique and exhibit an mistake concept about a trapped critical for executing this. For individuals scenarios faucet the F8 critical fast rather of keeping it down. It provides up the Sophisticated Boot Choices window, in which you can select to boot into Safe and sound Method, Safe and sound Method with Networking, and Safe and sound Method with Command Prompt, amongst numerous other solutions. Use the arrow keys to pick the Safe and sound Method you choose and push Enter following that.

Sophisticated boot solutions in Home windows seven

Observe: If you are not able to get started your Home windows seven laptop ordinarily following putting in new motorists or shifting configurations, you might want to go down and try out the “Last Known Good Configuration” possibility ahead of making an attempt Safe and sound Method. Preferably, this reboots Home windows seven as it was ahead of the dilemma software or possibility was set in spot.

two. Use the Procedure Configuration resource (msconfig.exe) to boot Home windows seven into Safe and sound Method

A different possibility is to use the Procedure Configuration resource. The swiftest way to do that is to sort the command msconfig in the research discipline from the Start off Menu and then click on the msconfig outcome.

Open System Configuration tool in Windows 7Open up Procedure Configuration resource in Home windows seven

At the time Procedure Configuration opens, go to the Boot tab. There you obtain a configurations area named Boot solutions and an possibility named “Safe boot.” Allow it.

Enable Safe boot in the System Configuration toolAllow Safe and sound boot in the Procedure Configuration resource

Just after you check out the “Safe boot” entry, click on Okay and verify no matter if you would like to restart now or later on.

Xem Thêm  How to Configure RAID on a Dell Personal Computer

The up coming time you get started Home windows seven, it is heading to load the Safe and sound Method.

Restart Windows 7 after changing the boot optionsRestart Home windows seven following shifting the boot solutions

Observe that this location is to some degree long term right up until you alter it back again. You have to return to the Procedure Configuration resource, uncheck the “Safe boot” possibility, strike Okay and then restart your Home windows seven Computer all over again to get back again out of Safe and sound Method.

Set the normal boot in the System Configuration toolEstablished the standard boot in the Procedure Configuration resource

three. Use the Command Prompt to get started Home windows 7’s Safe and sound Method

Start off a Command Prompt window with administrator permissions. Lookup for “cmd” in the research discipline of the Start off Menu, proper-click on on the outcome and select “Run as administrator” from the context menu that opens.

Run Command Prompt as administrator, in Windows 7Operate Command Prompt as administrator, in Home windows seven

Reply Sure if you get a UAC prompt to approve the operate with administrator permissions. Operate just one of the subsequent instructions based on which safe and sound boot method you want:

  • Safe and sound Method: “bcdedit /set {default} safeboot minimal”
  • Safe and sound Method with Networking: “bcdedit /set {default} safeboot network”
  • Safe and sound Method with Command Prompt: “bcdedit /set {default} safebootalternateshell yes”

Enable the Safe Boot in the Command PromptAllow the Safe and sound Boot in the Command Prompt

Restart your Home windows seven technique, and it is heading to get started into Safe and sound Method. At this phase, each and every time you boot, you get the Safe and sound Method of Home windows seven. Just after you complete your session, operate this command to be equipped to boot Home windows seven ordinarily all over again: “bcdedit /deletevalue {default} safeboot”

Enable the standard Windows 7 boot in the Command PromptAllow the conventional Home windows seven boot in the Command Prompt

At the up coming restart of Home windows seven, you get the comprehensive working technique.

four. Use a Home windows seven set up push and the Command Prompt

Use a Home windows seven set up DVD to boot your laptop. At the time you see the to start with display of the set up wizard (the just one proven in the screenshot under), push at the same time on the Change + F10 keys from your keyboard. It triggers the start of a Command Prompt window.

The Windows 7 installationThe Home windows seven set up

In the Command Prompt window, operate this command: _”_bcdedit /set {default} safeboot minimal”. Then push Enter on your keyboard. You get the concept “The operation completed successfully.”

Xem Thêm  How to Enable/Activate Built-in Administrator in Windows 7

Activate Safe Mode from the Command PromptActivate Safe and sound Method from the Command Prompt

Now near Command Prompt and also near the Home windows seven set up wizard. The wizard asks if you are confident about canceling the set up. Say Sure and hold out for the laptop to reboot.

Close Install Windows 7 and restartShut Set up Home windows seven and restart

At the time your laptop restarts, it must quickly boot into Safe and sound Method. At this phase, each and every time you boot, you get the Safe and sound Method in Home windows seven. Just after you complete your Safe and sound Method session, operate this command to be equipped to boot ordinarily all over again: “bcdedit /deletevalue {default} safeboot”

Set Windows 7 to boot normally, from the Command PromptEstablished Home windows seven to boot ordinarily, from the Command Prompt

At the up coming restart of Home windows seven, you get the comprehensive working technique.

five. Use a Home windows seven restore disk and the Command Prompt

A different possibility to boot into Safe and sound Method is to use a restore disk. Boot into the restore disc to start with. On the principal window, select “Command Prompt.”

System Recovery Options offered by a repair disk for Windows 7Procedure Restoration Choices presented by a restore disk for Home windows seven

It begins a Command Prompt window wherever you operate numerous instructions. Enter just one of the subsequent instructions, based on which Safe and sound Method you want:

  • Safe and sound Method: “bcdedit /set {default} safeboot minimal”
  • Safe and sound Method with Networking: “bcdedit /set {default} safeboot network”
  • Safe and sound Method with Command Prompt: “bcdedit /set {default} safebootalternateshell yes”

Activate Windows 7 Safe Mode from the Command PromptActivate Home windows seven Safe and sound Method from the Command Prompt

Shut the Command Prompt window and then push Restart on the principal Procedure Restoration Choices window. It restarts Home windows seven into Safe and sound Method.

Close the Command Prompt and restart Windows 7Shut the Command Prompt and restart Home windows seven

At this phase, each and every time you boot, you get started the Home windows seven Safe and sound Method. Just after you complete your Safe and sound Method session, operate this command to be equipped to boot ordinarily all over again: “bcdedit /deletevalue {default} safeboot”

Enable the standard Windows 7 boot in the Command PromptAllow the conventional Home windows seven boot in the Command Prompt

At the up coming restart of Home windows seven, you get the comprehensive working technique.

Safe and sound Method in Home windows seven

When informed to enter Safe and sound Method, Home windows only hundreds the barest necessities wanted to perform (a small established of motorists and providers). You do not have entry to something but the main courses and capabilities of Home windows, which do not contain the motorists for your networking products – that means you commonly are not able to entry the web though in the conventional Safe and sound Method. Whilst in Safe and sound Method, you may sense that your display appears to be like wonky and distinctive than it commonly does. It is mainly because it has been established to operate at the cheapest feasible graphics configurations and the minimal resolution supported by Home windows. In the situation of Home windows seven, that is 800 x 600 pixels.

Xem Thêm  5 Problem-Solving Hacks to Fix Windows 7 Black Screen with Cursor

Also, you may observe that all 4 corners of the desktop have “Safe Mode” penned in textual content. On top of that, when you boot into Safe and sound Method in Home windows seven, you are normally greeted by the Home windows Assistance and Aid resource, conveying what Safe and sound Method is and how to use it.

Windows 7 in Safe ModeHome windows seven in Safe and sound Method

At the time all over again, bear in mind that Safe and sound Method does not load any 3rd-bash providers or courses that ended up intended to operate at startup. It hundreds only the main providers and characteristics wanted by Home windows seven to operate.

What do the distinctive forms of Safe and sound Method do?

You may have recognized that you have a few of solutions over and above the basic aged Safe and sound Method.

Safe Mode options in Windows 7Safe and sound Method solutions in Home windows seven

If you have to have the web to update motorists or other courses, make confident to select the “Safe Mode with Networking” possibility when initiating Safe and sound Method. It hundreds the motorists essential to use your community card or modem so that you can entry the web or other networked desktops though in Safe and sound Method.

Alternatively, if you choose to use the Command Prompt, you may want to use the “Safe Mode with Command Prompt” possibility so that it hundreds the applications essential to do this. The superior end users who use the Command Prompt in all probability by now know why this is valuable. Even so, even rookies can reward from making use of Command Prompt in Safe and sound Method. With just a number of very simple instructions, they can navigate the laptop a lot more speedily.

Did you enter Home windows 7’s Safe and sound Method?

Congratulations! Now you know how to boot any Home windows seven laptop into Safe and sound Method. It can be a lifesaver for all kinds of uncomfortable cases, and we would enjoy to listen to any tales you have about making use of Safe and sound Method for troubleshooting.

Trả lời